Pages

sábado, 30 de março de 2013

Why Mold Removal Is Important

Basement waterproofing is necessary if you wish to keep your home free of the possible dangers of molds. These fungi, unknown to some, pose serious health risks if left unattended for a long time. You see, prolonged exposure to molds may lead to some serious respiratory problems. They even produce toxic substances called mycotoxins that have led to death in a few cases. Normally, though, these toxins may cause neurological disorders. At the very least, mold growths in your home will trigger allergic reactions.

Mold remediation by a professional may be needed to make sure your place is free of molds. If present, then you need to take actions to get rid of them. Mold removal is necessary to protect your loved ones from such hazards. Basement waterproofing is just one of the important steps in keeping your home mold-free.

1. The basic idea of basement waterproofing is to stop water from getting in and settling in your basement. A damp environment is the favorite living condition of molds so you need to get rid of water. To do so, you will need to turn off the water first. Dry the leaky pipes and apply powerful sealants. If the pipes are damaged beyond repair, then you may have to replace them. Covering all the pipe joints and connections with sealant can also be done just to be sure.

2. Cracks on the walls where water may seep through are indications that you may need some foundation repair done. This is a delicate task so ask a professional to do it for you.

3. Construction-grade epoxy and other water sealants may be used to fix the big wall and floor cracks. The cracks should be cleaned out first before patching them up with sealants. Cracks on concrete cement walls and floors are repaired by filling them with mortar made of one part cement, two parts of sand and mixed with water.

4. As for small or hairline ones, you can fill them up with waterproofing mix. In both kinds of cracks, using a putty knife or a trowel makes the job of applying the sealants easier.

5. The next step in basement waterproofing is to apply or paint a waterproofing agent on the whole wall. Of course, you should have cleaned the whole basement first and got rid of all the mold growths before waterproofing the place. These annoyances also thrive on and eat paint, so you better be sure they're all gone before applying some.

6. Most mold remediation plans and assessments will also require a proper drainage system within and outside the basement. This will also prevent water that may still seep through to stay inside the basement. PVC pipes can be installed to direct water seepage and leaks to a sump pump which, in turn, will direct the water outside of the house. The purpose of external drainage, meanwhile, is to prevent water from penetrating the house, especially the basement.

7. Another good tip in preventing mold growths is to keep your basement clean. Check the place regularly for growths and get rid of them immediately. You can also use a dehumidifier every so often.


----------------------------------------------------
At DryMaster - Basement Waterproofing Haddonfield NJ we offer a full service basement waterproofing solution that addresses the needs of each individual homeowner using the latest equipment and techniques. Learn more at http://www.drymasterllc.com



EasyPublish this article: http://submityourarticle.com/articles/easypublish.php?art_id=319029

Nenhum comentário:

Postar um comentário